Heat Pump System

Two models of Shintaeki Heat Pump

PROPOSAL HEATPUMP SYSTEM

Special Design Compressor for Heat Pump Water Heater
A compressor designed specifically for heat pump use
producing hot water up to 80 °C with excellent efficiency

Automatic Heat Pump Data Record

The Heat Pump sends its operating data over Wi-Fi, so you can be sure
our service team is looking after your unit at all times

PROPOSAL HEATPUMP SYSTEM

  • 2 Years product warranty2 years product warranty
  • New design with minimum footprint.New design with a small installation footprint
  • SUS304 casing suitable for both indoor and outdoor.SUS304 stainless steel casing for indoor and outdoor installation
  • Increase evaporator for better heating efficiency.Enlarged evaporator coil for more efficient heating
  • Optional with 80 °C water temperatureModels available with water temperature up to 80 °C
  • Available for both R134a and R410aAvailable with R134a or R410a refrigerant

Working Principle

Working principle — A heat pump draws heat from the air to make hot water, using electricity only to drive the compressor and fan

Diagram of how a Heat Pump works: the evaporator absorbs heat from the air, the compressor compresses the refrigerant, heat is transferred to the water in the heat exchange tank, and the refrigerant returns through the expansion valve to the evaporator
  1. The fan draws air through the evaporator and the refrigerant absorbs heat from the air
  2. The compressor raises the pressure and temperature of the refrigerant
  3. The hot refrigerant transfers heat to the water through the heat exchange tank, delivering hot water for use
  4. The refrigerant passes through the expansion valve to lower its pressure, then returns to absorb heat from the air again

Main Components

Heat pump main component — SHINTAEKI products are designed by engineers with more than 10 years of experience in Heat Pump systems for hotels and industrial plants

  • Compressor

    Compressor

    Copeland & Panasonic

    Quality compressors from Copeland and Panasonic

  • Heat Exchanger

    Heat Exchanger

    Tube-in-Tube

    Tube-in-tube heat exchanger with good heat transfer to the water

  • Electronic Expansion Valve

    Electronic Expansion Valve

    Electronic expansion valve controlling refrigerant flow

  • Screen-touch Display Board

    Screen-touch Display Board

    Microcomputer intelligent control

    Touch screen with intelligent microcomputer control

  • Copper-finned Heat Exchanger

    Copper-finned Heat Exchanger

    L-STYLE blue hydrophilic fin

    Blue corrosion-resistant coated fins, larger heat exchange area and inner-grooved copper tubes for high efficiency

Specifications

Air Source Heat Pump : SHINTAEKI — from 3.5 to 90 kW. Scroll the table to the right to see all models

View Original Table
Air Source Heat Pump : SHINTAEKI specifications
ModelUnitSHIN-3.5WSHIN-5.0WSHIN-7.5WSHIN-12.0WSHIN-18.0WSHIN-24.0WSHIN-36.0WSHIN-42.0WSHIN-52.0WSHIN-90.0W
Heating Performance
Heating capacitykW3.55.07.512.018.024.036.042.052.090.0
Power inputkW0.8331.191.792.864.295.74.6 × 25.6 × 27.0 × 212.9 × 2
Running currentA3.85.458.2013.006.558.77.0 × 28.5 × 213.0 × 219.8 × 2
COP–4.24.24.24.24.24.23.913.753.753.5
Hot water productionL/h18020025037242052977496014841940
General
Power supplyV/Ph/Hz220/1/50380/3/50
Outlet water temp.°C55
Rated / Max. outlet water temp.°C60
Ambient temp. range°C−7 ~ 43
Rated pressure dropkPa50
Controller–Micro processor based digital wire controller with LCD display
Casing material–Stainless Steel 304
Components
Compressor type–RotaryScroll
Refrigerant–R410a
Material–Titanium
Water heat exchanger–High efficiency tube-in-tube or coaxial
Air side heat exchangerTypeHigh efficiency copper tube (interior screw) nested in aluminium fin
Water connection (inlet & outlet)inch1"1-1/4"2"2"2-1/2"2"
Coil type–Fin-tube: blue coated aluminium fins + inner
Coil tube dia.mm7 or 7.94
Coil rowsNos.1
Operating Control
Type–Full-automatic, intelligence
Control panel–LED display, back light
Display–Water tank temp., Ambient temp., Time, Operating mode, Discharge temp., Coil temp., Error code
Setting–Time, Time On/Off, Water tank temp., Defrosting cycle, Start temp. of defrosting, Exit temp. of defrosting, Exit cycle of defrosting, Power lost memory
Defrosting–Automatic 4 way valve reverse
Protection function–Compressor overload, discharge temp. and etc.
Dimensions & Weight
Noise leveldB(A)43485254555658656070
Dimensions (L × W × H)mm930 × 360 × 550930 × 360 × 550930 × 360 × 550720 × 720 × 820720 × 720 × 10501185 × 430 × 12551405 × 800 × 10501405 × 800 × 10501498 × 798 × 14432000 × 1005 × 1975
Net weightkg40657590125130250260330500

Data from the manufacturer's documents, subject to change without notice — ask about the right model for your use at 086-493-5886

All In One Heat Pump Water Heater

A dual energy system combining air-to-water technology and intelligent electronic water technology
to deliver hot water in a short time and in all weather conditions.
Enjoy convenient hot water with an energy-saving design.
Operates at -15 to 70 degrees Celsius, anywhere and at any time.

Features

  1. Tank material : high-grade duplex stainless steel 2250/2304 options
  2. Control display : elegant touch screen with optional Wi-Fi function
  3. Fan motor : optional EC motor for higher efficiency and extra quiet operation
  4. High efficiency : external copper coil wrapped around the inner tank, more efficient and safer for users
  5. Refrigerant : environmentally friendly R410A
  6. Protection : advanced corrosion protection for the water tank, with optional titanium anode
Internal structure of the All In One Heat Pump Water Heater: stainless steel tank wrapped with copper coil on the outside

Internal structure: copper coil wrapped around the outside of the tank, keeping water separate from the refrigerant

Shintaeki Heat Pump Specification

All In One Heat Pump Water Heater

View Original Table
All In One Heat Pump Water Heater specifications
ModelHP-SHIN-300L
Rated heating capacity3000 W
Tank nominal capacity300 L
Energy efficiency classA
COP A20/W553.75
Rated heating current3.7 A
Heating rated power810 W
Max. input current6.5 A
Max. input power1100 W
Power supply220 ~ 240V / 1Ph / 50Hz
Compressor brandPanasonic / Mitsubishi / GMCC
RefrigerantR410A
ControllerLCD digital display
Type of defrostingReverse circulation
Expansion valveElectronic expansion valve included
Fan motorAC fan motor
Water tank inner tank materialStainless steel SUS304
Inner tank material thickness2.0 mm
Outer tank shell materialGalvanized steel with white or silver-grey color painting, black color ABS plastic top cover
Water tank insulationPU foaming insulation
Water tank insulation thickness45–50 mm
Heat pump heat exchanger coilOutside wrapping
Auxiliary electrical heating3 kW / 220~240V / 50Hz
Mg. anodeG3/4" female, Ø22 × 300 mm
Water drain connectionMale G1/2
Max. water temperature70 °C
Rated water temperature55 °C
Max. working pressure of tank1.0 MPa
Rated water pressure0.6 MPa
Set point relief valve0.7 MPa
Working ambient temperature0 °C ~ 43 °C
Water-proof resistance classIPX0
Hot water supply (L/h, 15 °C → 55 °C)134 L/h
Sound pressure level< 50 dB(A)
Net weight85 kg
Net dimensions640 × 1780 mm

Heat Pump Installation Layout Examples

Examples of Heat Pump layouts with hot water storage tanks and piping — click an image to enlarge

Installation layout of Heat Pump with multiple hot water storage tanks
Installation layout of Heat Pump with multiple hot water storage tanks
Layout of Heat Pump and hot water piping system
Layout of Heat Pump and hot water piping system

Ask About the Right Model and Size
for Your Building

Tel 086-493-5886 , 089-497-9681
Our engineers will help you choose a model and estimate your initial savings